November 28, 2020

sounds

Welcome to Dynamic Sounds Ltd, London’s Largest Car Audio Retailer & Installer. We specialise in all kinds of Car Stereo, Car DVD & Navigation solutions. This includes Multimedia, CD Players, DVD Players, Car Stereos, Car Speakers, Car Radios, Subwoofers, Amplifiers, MP3 Players, USB Car Stereos, DVD Screens, Handsfree Bluetooth Car Kits, Dash Cameras, Speed Camera Detectors, Reverse Cameras and Reversing Sensors. We also provide services related to Car Audio Security and Vehicle Tracking Systems.

If you are looking for Car Audio, Stereo or DVD products from any major manufacturer including Alpine, Pioneer, JVC, Kenwood, Focal, Road Angel, Snooper, Sony, Mio, and Thinkware then you have come to the right place. We have Car Stereo Installation facilities using the latest equipment, be it for a simple CD player to a full blown In-Car Entertainment system.

At our Car Audio Installation Center we offer fitting solutions for all kinds of installs of Stereo, Multimedia AV Head units, DAB Radio Interfaces, iPod iPhone Integration, Parking & Reversing Sensors, Number Plate Cameras, Reversing Cameras, Parrot Bluetooth Handsfree Car Kits etc. We now stock all kind of Car Stereo OEM DAB, iPod Adaptors & iPhone Adaptors for your factory fitted Car Radio. We stock accessories from all the following manufacturers, Connects2, AutoDAB, Autoleads, and Parrot.

Source Article

...

Updated: 17/02/2019.

This post deals with a topic that creates much headache to cyclists and mechanics. “My bicycle makes strange sounds”. So: what to do when a bike starts creaking, scratching, clicking, squealing or something similar?

In my experience, it’s necessary to first determine the source of the strange sounds (obviously). Once the source is pinpointed, solution is usually obvious – usually involves tightening something, lubricating, adding mounting (anti-seize) paste to a connection/bolt etc. But how to find out what’s making the noise? That is sometimes not as easy as it sounds (pun intended). Here I’ll explain the system I use when some noise seems very mysterious and source can’t be figured out.

TLDR: problems with “bicycle making strange sounds” are sometimes trivial, while sometimes frustrating. I tried to systematically process this subject, hoping it will help someone. All the details are in this article.

Contents:

  1. Connected parts – introduction
  2. When does the sound occur and what does it sound like?
    2.1. Sound occurs without pedalling, on a flat, good road
    2.2. Sound occurs only on rough terrain
    2.3. Sound occurs with any kind of pedalling
    2.4. Sound occurs only when pedalling with force
    2.5. One scenario at a time
  3. Testing without riding
  4. Testing by riding
  5. When all else fails

1. Connected parts – introduction

Fact: hollow bicycle frame tubes (whichever material it was made of) are perfect for transmitting sound! This needs to be stressed. A noise from the rear end of the bicycle can seem to be coming from the bottom bracket, or the front end when riding, because the tubes can transmit the sound all too well.

Bearing the afore mentioned in mind, now I’ll list the bicycle “part sets” in terms of noise making – which I use for eliminating probable sound causes one by one:

  • Wheels (front and rear separately) – spokes can make pinging sounds, tyres can rub the frame, bearings can be damaged and noisy.
  • Brake pads can rub on the rim, or discs, making rubbing, or squeaking sounds.
  • Fork – bad, or misadjusted headset bearings can create creaking, or clunking noises.
  • Shock absorbers, whether on the forks, rear wheel, or seatpost must be clean and lubricated, or they will squeak.
  • Stem and bars – if they aren’t tightened properly, or if no mounting paste was used, they can produce crunching noises.
  • Brake and shift levers (as well as brake calipers) can get loose and make all sorts of noises – especially on bumpy roads.
  • Cables and housings can scratch and hit the frame, especially when turning bars, or riding on rough terrain.
  • Seatpost can make creaking noises, especially when pedalling hard. Reason for that can be that it’s too short, too long, too narrow (improper size for the frame), or it just needs a bit of mounting paste coating before re-insertion.
  • Saddle can be not tightened enough to the seatpost and make creaking sounds. Or the top part of the saddle can get a bit loose
…...